
Pūrleve Urinal Trap Cleaning System (A&B) #2024
Two-part deep-clean system for urinal traps and drains.
Part A is an acid de-scaler and Part B an enzymatic trap cleaner. For periodic trap maintenance and plug removal, not daily cleaning.
- For no water and low-flow flush urinals.
- Part A removes calcium and struvite scale. Part B breaks down organic buildup.
- Pūrleve recommends a monthly or quarterly cycle, depending on traffic.
- A urinal can return to use in about 20 minutes.
| Model | #2024 Urinal Trap Cleaning System |
|---|---|
| Part A | Urinal Trap Acid De-Scaler |
| Part B | Enzymatic Trap Cleaner |
| Cycle | Monthly or quarterly, driven by restroom traffic |
| Handling | Part A is corrosive to eyes: use eye protection. Do not use with products containing bleach or chlorine |
How to use
- Remove debris, then add Part A directly into the urinal drain and let it stand 5 to 10 minutes.
- Quickly pour one gallon of fresh water into the drain to purge the acid. Do not let the urinal overflow.
- Add Part B to the urinal. Do not rinse. Let it sit in the trap.
Contact sales
Contact sales: 925.371.1277 x229 or sales006@ekcos.com.
Resources
- Safety Data Sheet (SDS), Part A, Acid De-Scaler PDF, 8.1 MB, valid Feb 2017 to Feb 2019, Source: Pūrleve
- Safety Data Sheet (SDS), Part B, Enzymatic Trap Cleaner PDF, 7.9 MB, valid Feb 2017 to Feb 2019, Source: Pūrleve
- Maintenance and plug removal procedures PDF, 116 KB, Source: Pūrleve
- All documents